How do fix a flat work

The best solution is a well kept spare tire. Other things you will need if finally going forward with FAF are. Pull out from the highway or from a busy traffic street to your safe side or get to a car park. Park your vehicle away from the traffic on a flat surface to avoid causing more damage to the flat tire. It is important to note that your hazard lights are operational and on during the time you are roadside.

Get a bracing material such as brick or timber wedge. Place it in front and back of the tires that will not be lifted. This will ensure stability and prevent rolling since the hand brake will be left free to allow rotation of the flat tire to be repaired. Now jack up the vehicle while monitoring the tire pressure exerted on the ground.

Jack up until you ensures that the wheel is free to able to rotate. Rotate the flat tire as you check around to identify the source of the leak before you decide if using the product is a working solution. Sometimes identifying the tear or hole in the tire will be noticeable. Like if you have driven over the nail or any other visible object or one tire is lower than the others. If the puncture is not visible, then try to listen or feel for escaping air. You may need to use a soapy solution to aid in the visibility of leakages.

Always ensure that the damage is not too extensive. If this is the case, seek assistance. Open the tire valve by gently unscrewing it. Make sure the cap is placed in a safe place that is easy to locate when the need to put it back arises after tire repair.

Screw the FAF nozzle and hose to the tire valve and make sure that it is well attached and secure. In this process, you will hear the air inflation in the flat tire immediately when the nozzle secures the valve.

The tire sealants can must be emptied into a single tire and should not be used for any other purposes or other tires. After the Fix, A Flat can has been completely emptied, unscrew the nozzle and replace the valve cap.

If you have a hand pump, you should pressurize the tire to the recommended PSI level before you drive off to the nearest gas station for repairs. The PSI level is the recommended tire pressure level from the tire manufacturer, measured in pounce per square inch. If the tire is too damaged, get a certified mechanic, such as one from YourMechanic to put on a spare tire instead.

Look for the tear or hole in the tire - Sometimes, this spot will be obvious. Open the tire valve - Unscrew the cap of the tire valve and place it somewhere easy to find because you will need to put it back on after repairing the tire. Make sure that it is secure.

You will begin to hear air inflating the tire when the nozzle is completely secured on the valve. Warning : Fix-a-Flat is designed so that the entire can is emptied into one single tire.

Do not use the same can on several different tires. Close the tire valve - After the can is completely emptied into the tire, unscrew the nozzle and replace the valve cap on the tire. You should only drive the car about 2 to 4 miles after sealing the tire. Inflate tire to recommended psi level - The psi level of a tire is the manufacturer's recommended pounds per square inch level for a tire.

After using Fix-a-Flat, you may still need to inflate the tire with air so that it reaches the recommended psi level. Fill the tire - Pump air into the tire up to the recommended psi level, checking it frequently with a tire gauge.

The correct air pressure will also be listed on the tire placard attached to the vehicle door edge, doorpost, glove box door or fuel door. Using Fix-a-Flat is a temporary solution and your tire will need to be replaced or repaired by a professional. This article originally appeared on YourMechanic. Autoblog is partnering with YourMechanic to bring many of the repair and maintenance services you need right to you. Get service at your home or office 7 days a week with fair and transparent pricing.

We get it. Ads can be annoying. Login Sign up. Sign up. Why you can trust Jerry. Jerry partners with some of the companies we write about. However, our content is written and reviewed by an independent team of editors and licensed insurance agents, and never influenced by our partnerships. Learn more baout how we make money, review our editorial standards , reference out data methodology , or view a list of our partners.

While not a permanent fix, Fix-a-Flat can get you back on the road long enough to get to a repair shop. Fix-a-Flat is an aerosol water-based sealant that seals punctures, inflates tires in a pinch, and won't prevent the tire from being repaired by a professional shop. It comes in several options based on your tire size, including compact, standard, large, and extra large. Determine which product is best for use on your vehicle and keep a bottle in your car for emergencies.

Here's our instructions on how to use Fix-a-Flat for car tires. Step 1: Pull over or get to a safe location. The first thing to do if you think you might have a flat tire is to get your vehicle to a safe location. Step 2: Examine the tire. Flat tires can be caused by road debris or other objects, or by excessive wear. Your tire could just be leaking air, or it might have gone completely flat. Look for the source of the air leak or damage to understand what the best solution is.

If you do notice a flat, using Fix-a-Flat to travel a short distance under miles or for a short period of time three days or less can help avoid a costly tow.

Step 1: Have a can of Fix a Flat in your vehicle. Step 2: Unscrew the cap on the tire valve. You will be applying Fix-a-Flat through the valve on the flat tire. Step 3: Shake it up. Before using Fix-a-Flat, you need to shake the can vigorously. After shaking the can well for about 30 seconds, unscrew the tire valve cap and screw the nozzle of the can onto the valve.

The can should be in an upside down position as the plastic nozzle is screwed on in a clockwise direction. Step 4: Secure the Fix-a-Flat nozzle to the tire valve.